Wholesale TY-SXD2-B single-phase electric energy metering box Manufacturer, Supplier
Product Description
Teyi Electric's TY series FRP electric energy metering box is manufactured using SMC composite material molding technology. The material is a composite of unsaturated polyester resin and glass fiber. The product has multiple advantages: excellent electrical insulation performance, outstanding mechanical strength, good flame retardant properties (in line with relevant fire protection standards), excellent corrosion resistance and anti-aging ability, and beautiful appearance design. Under normal use conditions, the indoor service life can reach 40 years and the outdoor service life can reach 30 years. The performance is far superior to traditional metal or plastic meter boxes.
This series of products has a flexible design and supports single-family independent installation or multi-family combined configuration, and is suitable for all kinds of residential areas and civil power distribution sites. Its installation process is simple and fast, it adopts concealed wiring scheme, and is equipped with professional rainproof structure design to ensure reliable protection for power metering equipment in outdoor environments.
- Component Integrity Check: Before operation, verify that all components, accessories, and fasteners of the meter box are complete and intact.
- Vertical Installation: Secure the box vertically. The maximum allowable tilt angle must not exceed 54°.
- Installation Environment: Prioritize sites free from severe vibration, mechanical shock, and corrosive gases or chemicals.
- Material Protection Limits: The composite material cannot withstand strong alkali, oxidizing acid, amine, or ketone solvents, and is subject to damage from chlorinated hydrocarbons and aromatic solvents. Avoid contact with these chemicals, and prevent impacts or sharp scratches.
- Environmental Conditions: Mount the unit in a cool, dry area away from direct sunlight to maximize service life.
- Box Opening Procedure: Keep fixing points inward, remove the two upper cover screws at the bottom center, and open the box according to directions.
- Wall Mounting Process: Drill holes aligned with the box mounting positions, insert expansion anchors, secure the base, and mount the cover.
| TY | SX | D2 | 4 | B |
| Company Code | SMC non-metallic metering box | Single-phase multi-meter metering box | Table number | Second Generation |
| Configuration | Name | Component Model | Quantity |
| Total incoming line | Molded case circuit breaker | CDMK-125C/3300 125A | 1 |
| Incoming switch | Disconnector | CDGK 2P 100A | 4 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 4 |
| TY | SX | D2 | 6 | E |
| Company Code | SMC non-metallic metering box | Single-phase multi-meter metering box | Table number | Fifth Generation |
| Configuration | Name | Component Model | Quantity |
| Total incoming line | Molded case circuit breaker | CDMK-125C/3300 125A | 1 |
| Incoming switch | Disconnector | CDGK 2P 100A | 6 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 6 |
| TY | SX | D2 | 6 | B |
| Company Code | SMC non-metallic metering box | Single-phase multi-meter metering box | Table number | Second Generation |
| Configuration | Name | Component Model | Quantity |
| Total incoming line | Molded case circuit breaker | CDMK-125C/3300 125A | 1 |
| Incoming switch | Disconnector | CDGK 2P 100A | 6 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 6 |
| TY | SX | D2 | 12 | B |
| Company Code | SMC non-metallic metering box | Single-phase multi-meter metering box | Table number | Second Generation |
| Configuration | Name | Component Model | Quantity |
| Total incoming line | Molded case circuit breaker | CDMK-250C/3300 200A | 1 |
| Incoming switch | Disconnector | CDGK 2P 100A | 12 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 12 |
