Wholesale China Suppliers Factory TY-SXD1-FSH1 Waterproof Box for IP44 Meter Protection Against Moisture and Dust Supplier, Suppliers
Product Description
Product Use Scope and Conditions of Use
The TY series of electric energy meter boxes integrate single-phase and three-phase types, and are suitable for power supply systems with rated current of 10A-250A, AC 50Hz or 60Hz, and voltage of 220V to 690V, and perform single-phase and power electric energy metering and control tasks; its operating environment requires a temperature range of -25℃～+50℃ (average temperature ≤+35℃ within 24 hours), and the relative humidity does not exceed 80% at 40℃ under clean air conditions, and higher humidity levels are allowed under low temperature conditions.
Installation Specifications
◆ Pre-installation checks
Thoroughly check the structural integrity and component completeness of the cabinet before installation.
◆ Targeting criteria
- Use vertical installation, and the inclination angle is strictly controlled within the range of ≤5°
- Site selection principle: no mechanical vibration/strong impact source, no chemical corrosion risk area
- Deploy in a cool and dry environment, avoiding continuous direct sunlight
◆ Chemical protection requirements
Do not contact with strong alkalis, oxidizing acids, amines, ketones, chlorinated hydrocarbons and aromatic solvents.
◆ Physical protection measures
During use, be careful to prevent collisions and scratches with sharp objects to keep the surface protective layer intact.
Standardized Installation Process
Remove the central fixing screw at the bottom and open the box according to the standard process.
| Protection Category | Implementation Standard |
|---|---|
| Mechanical protection | Avoid vibration and shock sources and regularly check the fixed structure |
| Chemical protection | Establish a hazardous chemical isolation mechanism |
| Environmental protection | Implement temperature and humidity monitoring and UV shielding measures |
Strict compliance with this specification can significantly extend the service life of metering equipment and ensure the reliability of power system operation.
Core Electrical Parameters
| Parameter Category | Technical Specifications |
|---|---|
| Rated current | 10A–250A (full range coverage) |
| Short-time withstand current | ≥30kA (main busbar system) |
| Parameter Category | Technical Specifications |
|---|---|
| Insulation resistance | ≥20MΩ (normal working condition) |
| Rated insulation voltage | 800V (UI value) |
| Electrical adaptability | 50Hz/60Hz dual frequency compatible |
| Protection level | IP44 (dust and splash proof) |
- Current carrying capacity: The main busbar supports a wide current load range from 10A to 250A
- Short circuit protection: 30kA high short circuit current tolerance ensures system stability
- Insulation reliability: Double insulation design (resistance/voltage) ensures safe operation
- Environmental adaptability: IP44 protection level to cope with dust and liquid splashing scenes
Appearance and Installation Dimensions
